Use and Care Manual

2. Lift up a completed
Post/Girder Assembly slowly
and carefully. Make sure
Girder is facing outward.
3. If Post Mount Hardware is installed, position
bottom of Posts in Hardware.
4. Secure Post to Post Hardware with appropriate
hardware such as lag bolts or a sufficient number
of screws.(Hardware Not Supplied)
Post
Hardware
Lag Screws
(not included)
5. Locate Girder with
Deep Notch on Bottom
(C) and lift up between
both completed
Post/Girder Assembly’s.
Lift, position and attach the
second Post/Girder Assembly
to Post Hardware.
Girder facing
out.
Deep Notch facing down.
Important- You will require
the assistance of 2 helpers
to support the posts up to
Step 7.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 5