Use and Care Manual

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 7
Joist (D)
4” long
screws
1 - 4” screw
Completed
Joist/ Stub Joist
connections.
9. Complete the remaining 9 Stub Joists aligning and
attaching as per Step 8. There are two
Joist / Stub Joist Assembly’s, complete both now.
10. Carefully lift up completed Joist / Stub Joist
Assembly and fit notches onto Girder.
11. Attach all Stub
Joists and Joist to
Girder with 1 - 4”
screw per piece.
Complete both
Assembly’s
Note: Drill pilot holes
in Joists and Stub
Joists to make it
easier to screw in 4”
screws.