Use and Care Manual

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 8
F
D
D
Completed Ladder Section
Joists are pre-marked
to correct Blocking
placement.
2 - 3”
screws
per side
12. On a flat surface, position Ladder Blocking (F)
where marked on top edge of Joist (D) and screw
with 2 - 2 1/2” screws per end. Ladder Blocking
should be flush with top and bottom of Joist with all
notches facing down.
13. Complete all four Ladder Sections
on the ground prior to moving to Step 14.
14. Carefully lift up one of the
Ladder Sections between
Girders. You will require a
helper to assist in
lifting Ladder Sections.