Use and Care Manual

22. Place 2nd Window Wall Panel in
front and attach. Insert 2nd Window
Insert as per Step 21.
23. Position and attach Narrow Wall Panel to left side wall
stud with 3 - 2.5” screws as per Step 17. Note: Narrow
Walls are 73” high (2” shorter than wide walls).
24. Locate Vertical Door Jamb and position flush against right wall panel stud. The Jamb is 3” wide
and will sit flush to outside of wall siding. When positioned correctly, secure Jamb using
4 - 2.5” screws.
25. Position and attach the Door Header to Door Jamb and Narrow Wall Panel top framing. Header
should sit flush with Door Jamb and Outside of Narrow Wall Panel Siding. Attach with
4 - 2 1/2” screws.
Jamb sits flush with
outside of siding.
Dado cut on edge
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 11