Warranty

29. Position Side Top Plates on other side wall top framing to complete. Use 4 - 2” screws per piece.
28. Next, attach the 4 Front and Rear Top Plates (2 per side). The Front and Rear top plates are
angle cut down the Edge. Once again, position top plate on wall plate so it is flush with inside of wall
plate. Secure with 4 - 2” screws per piece.
Front Top Plate
Side Top Plates
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 13
30. Locate Gable 1/2 Walls for both sides of the
shed. Align framing and wall siding lapp together.
Screw center wall framing of each piece together
with 3 - 2 1/2” screws. Note: prior to attaching, try
each combination of Gables for best fit.
Notched at top
Flashing
Male / Female Wall
Lapp Siding
Plate flush to inside
of wall framing