Warranty

31. Lift up a completed gable section and place on top of Side Top Plate on wall. The gable
framing should sit flush with the inside of the top plate.
32. The gable should be centered sideways (left to right) on the top plate. Hint: use a straight edge
to check the angle of the gable framing and top plate. Both angles should line up. Adjust gable
accordingly. Temporarily attach to walls and top plate with 2 - 2” screws. Gables may need slight
adjustment in Step 43. Complete attachment in Step 43 with 6 additional screws.. Screw from the
bottom of gable framing down into Top Plate and Wall.
straight edge
33. Complete positioning and attachment of Side Gable as per Step 32.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 14
Gable Framing
Flashing to overhang
wall (See Step 64)
Gable
Framing
flush with
Top Plate