Warranty

45. Roof Gussets are positioned on middle rafters. When correctly positioned, slide gusset up,
using a level to square, and attach to rafters with 4 - 2” screws. Complete remaining Gussets.
91” across
46. Identify Roof Panels. There are 2 Outside and 1 Middle Roof Panel per side. Starting with
outside rear panel, lift up and place on rafters.
Shingles overhang plywood
on outside panels.
Shingles and plywood
flush on middle panel.
Roof facing
down with
roofing felt
showing.
Outside Roof Panel.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 19
44. Secure Rafters to Top Wall Framing with 1 - 3” screw per rafter (excluding rafters sitting on gable
framing). Screw through Wall Frame at an angle. Prior to attaching, make sure front and rear walls
are properly aligned. Have two helpers push the front and rear walls at the top from the outside of
shed until inside to inside measurement between front and rear plates is 91”.