Warranty

48. Locate Middle Roof Panel and place on middle rafters. With Middle Roof Panel aligned as per
Step 46, tack panel down to rafters with 2 - 2.5” screws in the bottom row of shingles.
49. Lift up, position and attach 2nd Outside Roof Panel to Rafters as per Step 46.
Roof Plywood flush
with rafter end.
47. Place Outside Roof Panel so it sits flush on 3rd rafter from the outside (doubled up rafter). End
of plywood should be flush with end of rafter at bottom. From the outside, screw down through bottom
and top row of shingles into rafter with 2 - 2.5” screw.
Shingles overhang
plywood on Outside
Roof Panel.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 20