Warranty

74. Attach Interior Door Stops to door
framing. Start with Horizontal piece first. Use
4 - 2” screws to secure each Stop. Stops
should overlap door by approx. 1/2”.
Door
Stops
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 28
73. Attach Door Handle, Exterior Barrel Bolt and Interior Barrel Bolt to door. Handle is
positioned on top door, Barrel Bolt on bottom door and Interior Barrel Bolt (silver) to top door stud.
Attach Black Barrel Bolt as illustrated above with 3/4” Black Screws. Note how female part of Barrel
Bolt is positioned higher than male. Do a dry run first to position Barrel Bolt correctly. Important: Drill
shallow pilot holes with 1/8” drill bit prior to securing with screws to prevent wood splitting.
Temporarily positioned
Interior Door Stop to help
align Interior Barrel Bolt.
75. Assemble Flower Box Kit with Assembly
Instructions found in each Flower Box Kit. Position
completed Flower Box below bottom of window
trim and secure with 2 - 2” screws per box. Screw
from inside of box into the center wall stud. Attach
second screw 2” underneath first screw and once
again into the wall stud. Install 2nd Flower Box Kit.