Instructions / Assembly

Alternate Door Configuration (Door on Left or Right of Center)
To configure the Cabana so the Door
is positioned on the left or right of
center wall panel, follow the general
directions in this manual for a regular
door configuration and note the
following changes.
A. Follow sequential Steps 9-17 in the Wall
Section for regular configuration to position
and secure wall panels. For Door on left
side, align and attach two Window Wall
Panels in center and right positions. For
Door on right side, configure Window Walls
on opposite side.
B. With walls positioned and attached together, locate Door Jamb and orientate on Side Wall Panel
stud. Align Door Jamb so Flush with bottom wall plate of wall framing. Wall siding will overhang 1/2”
on outside. Plate will overhang doorway side by 1”.
C. When correctly aligned, attach Door
Jamb to wall stud with 4 - 2 1/2” screws.
D. Attach 1 Vertical and Horizontal Door
Stop. See Step 66 for detail. May have to
trim Horizontal Door Stop to fit.
Door Stops
1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 26