Instructions / Assembly

D. Miscellaneous Section
Ridge Caps
Side
Facia (4)
Rear Wall Narrow Trim (2)
Horizontal
Gable
Trim (4)
Bottom Skirting
Front & Rear (6)
Bottom Skirting
(Side) (4)
Wide Corner
Trim (4)
Dutch Door
Bottom
Flower Box
Kits
Door
Hinge (4)
Filler Trim (4)
Corner
Narrow
Trim (4)
Doorway
Narrow
Trim (2)
Facia & Hor.
Gable Detail
Plate (4)
Pentagon Facia
Plate (2)
Door Pull Handle
& Exterior Barrel
Bolt
Note: missing from exploded drawing: Interior Door Stops; 1 Interior Barrel Bolt
Exploded view of all parts necessary to complete the Miscellaneous Section. Identify all parts prior to starting.
Dutch Door
Top
1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 20
Side
Narrow
Trim (2)
Horizontal
Door Trim
Front and
Rear Facia (4)
47. To further secure roof panels, from the inside, drill pilot holes in each Mid Rafter (3 per Rafter)
on an angle. Using 3 - 2 1/2” screws, secure rafters to roof plywood. Note: from outside, have a
helper push roof panel down so plywood sits flush against rafter when securing.
Mid Rafter
Plywood
3 - 2 1/2” screws angled
into each Mid Rafter