Instructions / Assembly

24. Position and attach Narrow Wall Panel to left side wall stud with 3 - 2 1/2” screws as per
Step 17. Note: Narrow Wall is 73” high (2” shorter than wide walls). Siding overhangs adjacent wall
stud and floor.
25.Locate Vertical Door Jamb and position flush against right wall panel stud. The Jamb is 3” wide
and will sit flush to outside of wall siding. When positioned correctly, secure Jamb using 4 - 2 1/2”
screws.
26. Position and attach the Door Header to Door Jamb and Narrow Wall Panel top framing. Header
should sit flush with Door Jamb and Outside of Narrow Wall Panel Siding. Attach with
4 - 2 1/2” screws.
Jamb sits flush with
outside of siding.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 11
Header has step in edge that is
positioned to the top and facing outside.