Instructions / Assembly

44. With both Ridge Boards connected, completely secure Gable framing to walls and rafters.
Use 4 - 2” screws per Rafter. Use an additional 6 - 2” screws to secure Gable to wall. Note: you
may have to remove the 2 temporary screws in Gable from Step 33 and reposition Gable for
best fit prior to completing gable attachment.
Metal Offsetting
Ridge Board
Connectors
43. At the peak, align Ridge Boards so they are flush together and secure them with 8 - 1 1/4”
screws. To completely secure Ridge Boards, place 4 - 1 1/4” screws into any of the remaining Metal
Ridge Board Connector holes. Complete both sides. Important: if there is a gap between Ridge
Boards, try pushing side walls closer together from outside. Walls should be 91” apart at top from
inside of wall plate to wall plate.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 18
Gable Notch
Ridge Board
Rafter