Instructions / Assembly

53. Slide in another Long Filler Shingle
and attach as per Step 52. On your last
row of shingles, the filler shingle is
precut to fit properly. Attach to roof with
2 Shingle Nails per shingle.
Attach above the
exposure line.
Exposure Line
51. Roof Filler Shingles are included to
cover roof seams. Starting at the bottom,
slide the first Long shingle in until flush with
other bottom shingles.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 21
4 - 90 degree Simpson
Ties / Gable.
55. To further secure roof panels, from the inside, drill 1/8” pilot holes in each mid rafter (3 per rafter)
on an angle. Using 3 - 2 1/2” screws, secure rafters to roof plywood. Note: from outside, have a
helper push roof panel down so plywood sits flush against rafter when securing.
Mid Rafter
Roof Plywood
3 - 2 1/2” angle screwed
into each mid rafter.
54. Position 2 Simpson Strong ties on plywood and
outside rafters and secure with 4 - 1 1/4” screws.
There are 8 ties in total, 4 per Gable.
52. Screw first filler shingle down to rafters using
1 - 2 1/2” screw per panel (2 in total). Make sure to
screw into both rafters.