Instructions / Assembly

Note: The floor will be flipped over and floor
runners will sit on your foundation. It is
important to note that having a level
foundation is critical. Choosing a foundation will
vary between regions. Typical foundations can
be concrete pads or patio stones positioned
underneath the floor runners.
10. With Floor Runners attached, carefully flip
the floor over and place on your foundation.
Caution: you will need 2 people to assist you.
Be careful when laying floor down not to bend
or twist floor. When in place, level floor
completely.
Concrete Slab
Foundation
Foundations
7. Attach Floor Runners to completed floor frame.
There are 2 floor runners per 91” side and 5 completed
runners in total. Use 3 - 2 1/2” screws per Runner.
8. Make sure Runners are flush with
outside and front and rear floor framing
but not overhanging.
9. Complete all Floor Runners.
11. Position Plywood Floor pieces (4) on top of completed
floor joists. Plywood is cut slightly smaller than floor framing.
Keep plywood seams tight.
Front
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 6
plywood
pushed together
at seams.