Warranty

71.
Door Panel should be positioned so
there is 1/4” gap at top. Use a shim once
again to help you position door correctly.
Attach top and middle hinge to narrow trim
with hinge hardware provided.
Approx. 1/4” gap
73. Attach Interior Door Stops to door framing
from inside of shed. Start with Horizontal piece first.
Use 4 - 2” screws to secure each Stop. Stops should
overlap door by approx. 1/2”.
Door
Stops
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 27
72. Attach Black Barrel Bolt as illustrated above
with 2” & 3/4” Black Screws. Note how female part
of Barrel Bolt is positioned higher than male. Do a
dry run first to position Barrel Bolt correctly.
Important: Drill pilot holes with 1/8” drill bit prior to
securing with screws to prevent wood splitting. On
3/4” screw, drill shallow pilot hole only.
2” Black
Screws
2” Black Screws
1-3/4” Black
Screw
74. Assemble Flower Box with Assembly Instructions found in Flower Box Kit. Position completed
Flower Box below bottom of window trim and secure with 2 - 2” screws. Screw from inside of box into
the center wall stud. Attach second screw 2” underneath first screw and once again into the wall stud.