Warranty

19. Continue positioning and securing
wall panels around your floor. Attach wall
studs together as per Step 17. Be sure
that rear wall panels fit between the side
wall panels (sandwiched).
Do Not Attach
Walls To Floor
Until Step 23.
17. Position a 2nd Solid Wall into place on plywood floor. Butt both vertical wall studs of side and rear
walls together and attach with 3 - 2 1/2” screws. Screw at the bottom, middle and top of stud to secure
properly.
Rear Solid Wall
Side Solid Wall
18. With the corner wall
attachment complete,
position a third wall
panel in place. Wall
siding should overhang
floor by approximately
1/2”. When positioned
correctly, attach both
rear wall panel studs
together as per Step 17.
Rear Solid Wall
2x3 wall framing flush
with floor framing.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 9
Optional - Caulking seams will
help prevent moisture from
entering at seam. Caulking
not included in kit.
Side Wall Panels
Rear Wall Panels