Instructions / Assembly

24. Locate Black “Tee” Hinges (U). Attach hinges to
horizontal door trim using 1 - 1 1/2” Bolt with Black
Head (FF).
Note - Door is pre-drilled for bolt. Tighten Silver Nut
using wrench. Finish hinge by securing with
2 - 3/4” Black Screws (J). Drill small pilot holes first to
prevent wood from splitting. Complete both doors.
(4 hinges). Starting with left side door, lift until hinges
contact door trims.
3/4” Black
Screws.
1 1/2” Bolt
with Black Top.
Silver Nut with Washer.
Pre-Drilled.
Left door complete
with hinges attached.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 13
1 - 2” screws per
Hinge initially.
25. Leave a gap on left side and bottom of
door approximately 1/8”. Use a shingle to
shim the door at bottom to help position
door evenly.
When door is aligned correctly, screw hinge
into vertical door frame trim with
3 - 2” Black Screws (H) per hinge.
Use only 1 screw initially per hinge until
both door alignments are confirmed. Drill
pilot holes to prevent wood from splitting.
Shim with
shingle (4P).
1/8”
gap.
1/8” gap.
Gap between
top of door
and door
header.
Lift door
into place.