Instructions / Assembly

36. Locate Front Door Header Trim (4M) - 1/2” x 1” x 41 1/4” and place between corner door trim
flush against door header and plywood roof sheathing. Make sure door header trim is positioned so
it does not impede the opening and closing of doors. When correctly positioned, secure with
5 - 1 1/2” Finishing Nails (K).
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 17
35. Position rear skirting piece between side skirtings and underneath rear and center trims. Secure
with 6 - 1 1/2” Finishing Nails (K). Locate Front Bottom Skirting (4L) - 1/2” x 2 1/2” x 41 1/4” and
place between front corner door trims even with the bottom of the floor. Secure with 6 - 1 1/2”
Finishing Nails (K).
34. Locate Bottom Side Skirting (4J) - 1/2” x 2 1/2” x 21 1/8” and Bottom Rear Skirting (4K) -
1/2” x 2 1/2” x 45 1/4” pieces. Starting with the sides, position tight to corner door trim and flush
underneath corner trims. Secure with 3 - 1 1/2” Finishing Nails (K). Complete both sides.
Rear Skirting (4K).
Side Skirting (4J).
Front Door Header Trim (4M).
Rear Skirting
Front Skirting