Use and Care Manual

Door Flange (K)
to be positioned
on Left Door.
20. Open Left Door and position Door Flange (K) flush against
Horizontal Door Trim making sure also to align evenly at top and
bottom of Door Trim. From the inside screw Flange to door with 4 - 1”
screws. Important - Drill Pilot Holes first to prevent splitting of wood.
Left Door
Left Door
Hor. Door Trim
21. Position Upper Rear Horizontal Trim (L) on top lap of Rear Wall Panels evenly from side to side.
Nail Trim into Wall Framing and Roof edge with 6 - 1 1/4” finishing nails
22. Locate Side and Rear Skirting (M & N) pieces. Starting with the side, position tight
to Corner Door Trim and flush with bottom of Floor. Secure with 3 - 1 1/4” Nails per piece. Complete
other side. Position Rear Skirting Piece between Side Skirting and secure with 6 - 1 1/4” nails.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 11
Flange may
need 2
additional 1”
screws from
front to
strengthen.