Use and Care Manual

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 17
38. Locate 1 Shelf Support (BB) and position on Vertical Shelf
Support and Rear Wall framing. Drill pilot hole in Shelf Support to
prevent splitting and attach with 1 - 1 1/4” screw on each end.
Note - Make sure Shelf Support is level prior to attaching. Attach 2nd
Shelf Support to Side Wall framing as described above. Place
Shelf (CC) on top of Shelf Supports.
Shelf
Support
(BB)
Positioned 3/4”
on Side Wall
framing. Drill
pilot hole on
angle before
screwing.
39. Secure Shelf to Shelf Supports with 4 - 1 1/4” screws. Drill pilot
holes to prevent wood from splitting.
40. Complete positioning and attachment of 2nd Shelf as per Step 38-39.