Use and Care Manual

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 8
12. Locate both Angle Cut Gable Siding Pieces (G). There are left and right side pieces. Starting
with the left side, place above Side Wall so lap sidings fit together.
Left Side Angle Cut Gable Siding (G)
13. Align Gable Siding flush at rear with Wall Siding and flush with top of Plywood Roof. Secure with
7 - 1 1/4” finishing nails. Make sure to nail into edge of Plywood Roof at top and into wall framing at
bottom. Hammer at slight angle to contact wall framing. Align right side Angle Cut Gable Siding Piece.
Plywood Roof and Angle Cut Gable
Siding Flush with each other.
Siding
aligned
at rear
14. Complete right side Angle Cut Gable Siding Piece as per Step 12-13.