Use and Care Manual

15. Locate Front Corner Door Trims (H). Position flush with
Side Wall framing and flush with bottom of Floor. Attach with
8 - 1 1/4” finishing nails. Complete both sides. See Step 24 for
complete front trim alignment.
Front
Corner
Door
Trims (H)
Trim Flush to
bottom of Floor
Flush with
2x2 Side
Wall frame
Completed Front
Corner Door Trims
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 9
Side Wall Frame.
16. Locate Black “T” Hinges (I). Attach Hinges to
Horizontal Door Trim using 1 - 1 1/2” Bolt with
Black Head.
Note - Door is Pre-drilled for Bolt. Tighen #10 Silver
Bolt using wrench. Finish Hinge by securing with
2 - 3/4” Black Screws. Drill small pilot holes first to
prevent wood from splitting. Complete both
Doors.(4 Hinges).
Starting with left side Door, lift until Hinges contact
Door Trims.
3/4” Black
Screws
1 1/2” Bolt
with Black Top
#10 Nut with Washer
- Silver
Pre-Drilled
Left Door complete
with Hinges attached.
Hor. Door
Trim