Use and Care Manual

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 23
46. Install second Part U - Roof Rafter using Rafter Template Spacer. Align Spacer tight against
Rafter’s 2x3 edge. Position Rafter so dado cut of Ridge Board is aligned with gap in Rafter and tight
against 2x3 edge of new Rafter. Attach as per Step 45.
47. Install Rafters as illustrated above and to the
right as per Steps 45 & 46.
Confirm correct Rafter location by placing
Part Z - Vent Hinged Window or Part V -
Inside Vent Framing Support on Rafters.
Window must open and shut freely.
Rafters may need slight adjustments.
48. Install Center Rafters to complete Rafter section as illustrated above and to the right as
per Steps 45 & 46. Confirm Center Rafter location using Part Z or V. Adjust if necessary.
Part V - Inside Vent
Framing Support