Use and Care Manual

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 27
57. Locate and attach Part V - Inside Vent
Framing Supports - 3/4” x 2 1/2” x 49” with
6 - 2” screws. Position parallel with Hinged
Window.
Inside Vent
Framing Support
58. Complete both Supports. Locate both Heat Activated Hinges. Hinged Window will be marked for
correct location for Hinge. Heat Activated Hinge will require a basic assembly. Follow Manufacturer’s
directions. Attach with Manufacturer’s Hardware supplied. Phillips Head Driver will be required.
Marked
Important- Heat Activated Hinges will open only after the Greenhouse reached an inside temperature of
approximately 75 degrees Fahrenheit. Make sure Hinged Windows open easily and do not stick. We
recommend purchasing a thermometer once the Greenhouse is complete. Please monitor Heat Activated
Hinges to confirm they open and are functioning correctly.