Full Product Manual

53. Score/cut 1 Ridge Cap to 12” or to fit in the center of roof.
54. Attach center Ridge Cap with 4 - 1 1/2” Shingle Nails.
55. Position Bottom Door Panel in door opening.
Framing of door should be flush with Door Jamb.
Leave a 1/4” gap between floor and Bottom Door.
56. With Bottom Door correctly positioned, attach
Hinges to Door Jamb and Door Framing with
3/4” Silver Screws. Before completely securing all
screws, check door alignment by opening and closing
door. Adjust hinges as necessary.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 22
Carefully score or cut Ridge
Cap end with Utility Knife.
57. To attach Top Door, follow same procedure
as for Bottom Door. Leave 1/4” gap between doors.
1/4” gap