Use and Care Manual

46. Position Side Facia Trims on ends of roof plywood. Align tight against underside of shingles
so both Side Facia Trims meet evenly at the peak. Attach to end of plywood with 4 finishing nails per
piece.
47. Position Porch Facia Trims on ends of
Porch roof plywood. Align tight against shingles.
Attach with 4 finishing nails per piece.
48. Locate Porch Post Base Trims
(4 per Post) and position in a windmill
fashion around the base of the posts.
49. Attach Porch Post Base Trims with 2 finishing nails per piece.
Complete all Porch Post Base Trims around all Porch Posts. Place Rail
Support Block (1 1/2” x 3 1/2” x 3 1/2”) centered below each Handrail
section. Screw down from the bottom rail into the Block with 2- 2” screws
per piece.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 20
Rail Support
Block