Use and Care Manual

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 23
58. To attach Optional Top Door, follow same
procedure as for Bottom Door. Leave 1/4” gap
between doors. NOTE: When mounting Interior
Barrel Bolt, align doors so they are in the proper
closed position and position Barrel receiver
accurately. Use hardware provided in each kit.
Optional Top Door Attachment
1/4” gap
59. Locate Window Inserts. Place Window Insert into wall opening tight to wall siding. On the
inside, shim Window Insert evenly in cavity. Kits include one additional shingle for shimming of the
window. When properly positioned, secure Window Insert to wall framing cavity with 4 - 2” screws. If
Functional Door and Window Option has been purchased, secure Functional Windows as per
regular inserts above.
2 - 2” screws in
center wall stud
60. Assemble Flower Box with Assembly
Instructions found in each Flower Box Kit.
Position completed Flower Box below
bottom of window trim and secure with
2 - 2” screws per box. Screw from inside of
box into the center wall stud. Attach second
screw 2” underneath first screw and once
again into the wall stud. Install Flower Box
Kits underneath both side windows.