Full Product Manual

29. Temporarily attach Gable to walls and top plate with 2 - 2” screws. Screw from the bottom of
gable framing down into Top Plate and Wall. Gables may need slight adjustment in Step 40 and then
be completely attached with an additional 6 - 2” screws. Position 2nd Gable on side walls.
28. Place Gable so framing sits flush with the inside of the top plate. Center from front to rear using a
Straight Edge to confirm angle of gable frame and Top Plate line up. Adjust gable accordingly. From the
outside, make sure gable flashing overhangs wall siding.
1x3 Gable Framing
Straight Edge
Gable Flashing
30. Position and temporarily attach 2nd Gable as per Steps 28-29.
1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 14