Installation Guide

ManualsBrandsOutdoor Living Today ManualsOutdoors6 ft. x 3 ft. Cedar Raised Garden Bed

Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Thank you for purchasing a 6’ x 3’

Raised Garden Bed. Please take the

time to identify all the parts prior to

assembly.

Please use Safety Eyewear and Gloves

while Assembling. Be sure to read and

follow all operating instructions for any

tools used during assembly.

Remember- NO SAW CUTTING IS

REQUIRED!

Safety Points and Other Considerations

Please follow this instruction manual when

assembling your Raised Garden Bed and

retain the manual for future maintenance

purposes.

6’X3’ Raised Garden Bed

Assembly Manual

Page 1

Revision #7

March 16th, 2015

In the event of a missing or broken piece, simply call the Outdoor Living Today

Customer Support Line @ 1-888-658-1658 within 30 days of the delivery of your

purchase. It is our commitment to you to courier replacement parts, free of charge,

within 10 business days of this notification. Replacement parts will not be

provided free of charge after the 30 day grace period.

Raised Garden Bed Dimensions:

A: Height = 33 1/2"

B: Outside Width = 72”

C: Outside Depth = 39”

D: Inside Width = 69"

E: Inside Depth = 36"

F: Height to Bottom of Screen = 20”

Estimated Assembly Time for the

Raised Garden Bed = 1 Hour.

Summary of content (9 pages)

PAGE 1
Revision #7 March 16th, 2015 6’X3’ Raised Garden Bed Assembly Manual Thank you for purchasing a 6’ x 3’ Raised Garden Bed. Please take the time to identify all the parts prior to assembly. Please use Safety Eyewear and Gloves while Assembling. Be sure to read and follow all operating instructions for any tools used during assembly.
PAGE 2
Exploded View and Parts List for 6’x3’ Raised Garden Bed Parts List Panel Section Part A 36” wide Part B Sections 36” wide A 4 - Side/Rear Panels x 33 1/2” high 2 - Front Panels with Upper Hinged A A x 33 1/2” high Rib Section Part C 2 - Bed Rib Connecting Plates 1 1/8” thick x 5 1/2” wide x 20” high 2 - Bed Rib Frames Part D 1 1/2” thick x 1 1/2” wide x 33 7/8” long B A B Hinge D Hardware Kit C (Provided) Note: screws shown as actual size.
PAGE 3
Important Information for Homeowner 72” 33 1/2” 39” Selecting a Location - Garden Setting or Patio Walk around your property and make notes of the following: - sunny spots - slope of the land - light blocking trees and high buildings. Don’t hide your Raised Bed away in a dark corner. Ensure it has easy access to it. Place your Raised Bed on a level piece of land with good drainage. Take into account existing paths and utilities such as electricity and water.
PAGE 4
1. Orientate Panels as illustrated below. Note that Part A - Side/Rear Panels are solid and Part B- Front Panels (2) have hinged tops. When positioning, the wire screen is stapled on the inside of the panel. Be sure to align panels so the wire screen is positioned on the inside of the Raised Bed. el nt Fro n Pa l ne a tP n Fro de Si “ l ne 21 Pa Pa ne l You can find the Square Drive Bit for the screws in with the Hardware Kit Bag. eP an Re ar Pa ne l el Re ar Sid 2.
PAGE 5
3. Attach Panels completely together using 4 - 2 1/2” screws. Make sure Panels are aligned prior to screwing. el ar n Pa Re Ins ide 4. Align and attach 2nd Rear Panel Frames together making sure framing is aligned at top and sides. Use 2 - 2 1/2” screws in the upper screen frame area as illustrated. From the inside, angle screw 3 - 2 1/2” screws into panel framing to secure. Toll Free 1-888-658-1658 www.outdoorlivingtoday.com Page 5 sales@outdoorlivingtoday.
PAGE 6
Sid eP an el 5. Align and attach Side Panel as per Step 2. Use 5 - 2 1/2” screws to secure. Fr on tP an el Note; Be careful, Front Panel has a hinged top that can release and pinch fingers and hands until Eyehook is attached in corner. 6. Align and attach Front Panel - Part B to Side Panel with 3 - 2 1/2” . Align panel framing together as Step 2. Screw only into Front Panel framing below the screen hinged top. Attach Eyehook Hardware in the Front and Side Panels top framing.
PAGE 7
Fro nt P ane l 7. Align and attach 2nd Front Panel and Eyehook as per Step 6. Use only 3 - 2 1/2” screws below the screen hinged top framing. 8. From the inside, angle screw 3 - 2 1/2” screws into panel framing to secure Front Panels. Ins ide Part C Bed Rib Connection Plate (2) Part D Bed Rib Frames (2) 2 1/2” screw 9. Locate Bed Rib Connection Plates (2) - Part C and both Bed Rib Frames (2) - Part D. On a level flat surface, screw Connection Plate and Frame together with 1 - 2 1/2” screw.
PAGE 8
1” screws 10. Locate Brackets (4). Position Brackets in each corner and secure with 2 - 1” screw per Bracket. 11. Lift and position completed Bed Rib between Front and Rear Panels at the mid point. Align with bottom of panels and centered on framing. Secure with 6 - 2” screws per plate. Important- be sure to screw into panel framing. 6 - 2” screws Toll Free 1-888-658-1658 www.outdoorlivingtoday.com Page 8 sales@outdoorlivingtoday.
PAGE 9
12. Attach Barrel Bolt to Inside Inside Front P anel of Front Panel framing. Pre-drill shallow 1/8” holes to prevent wood from splitting. Do a dry run first to confirm screw alignment before completely securing. 13. To access your Raised Garden Bed, open the Barrel Bolt and Eyehook in corner(s) to release the screened hinged panel.