Installation Guide

14. To complete rib assembly, locate all 22 Bed Rib Connection Plates (Part E) - 1” x 5 1/2” x 20”.
20 Bed Rib Frames (Parts F) - 1 1/2” x 1 1/2” x 26 3/8” and 2 longer Bed Rib Frames (Part G)
- 1 1/2” x 1 1/2” x 29 1/4”. On a level flat surface, screw connection plate and frame together with
1 - 2 1/2” Screw per end. Align so plate and frame are flush at bottom. Complete both sides.
Part E
Bed Rib
Connection
Plates.
Part F
Bed Rib
Frame.
2 1/2” screw
15. Locate “L” Brackets in hardware kit. Four
brackets are required for completion of each rib
section. 6 smaller and 1 larger rib sections need
assembly. Position brackets in each corner and
secure with 4 - 1” Screws per bracket. Pre-drill first
with 1/8” bit to prevent wood from splitting.
1” screws.
16. Complete 11 bed rib sections. 10 with Part F
Bed Rib Frames (shorter) and 1 with Part G Bed
Rib Frames (longer).
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 10
Complete
4 Brackets.
Larger Rib Section
with Part G frames.