Installation Guide

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 5
3. Attach panels completely
together using 4 additional
2 1/2” Screws evenly
spaced on panel framing.
Make sure panels are
aligned prior to
screwing. Pre-drill first to
prevent wood from splitting.
4. Position and attach 2nd Rear Panel (Part A)
together making sure both rear frames are
aligned at top and sides. Use 2 - 2 1/2” Screws
in the upper screen frame area as illustrated to
the right. From the inside, angle screw 3 - 2 1/2”
Screws into panel framing to secure completely.
Use Wood Clamp to hold panels tight together
while screwing and pre-drill first to prevent wood
from splitting.
Inside
A - Rear
3 - 2 1/2”
screws
Be sure to level the
ground so panels sit
evenly.