Installation Guide

9. Locate all 7 Interior Panels
(Part D) - 30 5/8”w x 22”h. and 2
Narrow Interior Panels (Part DD) -
15 3/8”w x 22” h. Panel siding is
offset on framing. Orientate offset to
the inside. Align frame of 1st
Interior Panel (Part D) with the
bottom of the front B panel. Line up
Interior panel framing flush with
front panel framing. Screw from
front panel framing into interior
framing with 3 - 2 1/2” Screws.
Hold framings tight together while
screwing.
10. Align and attach framing of 2nd, 3rd and 4th
Interior Panels (Part D) to 1st Interior panel framing.
Angle screw panels together with 3 - 2 1/2” Screws
from the inside.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 8
D - Interior
D - Interior
B - Front
Interior Panel framing flush
with Front Panel Framing.
B - Front
B - Front
Interior frame
Panel Siding is
offset on framing.
Orientate offset
to the inside.
D - Interior
D - Interior
Panel Framing,
Flush.
D - Interior (inside)
2 1/2”
Screws.
Be sure to level the
ground so panels sit
evenly.
11. Align and attach framing of (Part DDD) and (DD Panels) as per Steps 9 & 10.
Angle screw panels together with 3 - 2 1/2” Screws from the inside.
2 1/2”
Screws,
D - Interior
DDD - Interior
DD - Interior