Instructions / Assembly

32. Align Top Door and space as per Bottom Door on sides. Leave a 1/4” gap between the Bottom
and Top Door. When in correct position, secure hinges to Wall Trim/ Support as per previous step.
1/4” gap
33. Locate both Rear Gable Wall pieces. Rear Gables have shingles that overhang the top and
bottom of the gable frame. Screw together with 3 - 2 1/2” screws.
34. From the outside, slide in a Rear Gable
Wall Filler Shingle to cover gable seam. Nail
down above the exposure line with 2 - 1 1/4”
shingle nails.
Filler
Shingles
35. Complete by attaching top precut
Filler Shingle with 2 shingle nails.
36. Lift up the rear completed gable section
and place on top of rear walls.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 15
See Step 65 for
explanation of
exposure line.