Instructions / Assembly

44. Carefully lift 1 completed Rafter Section up (make sure Soffit is facing down) and place on gable
framing.
46. To confirm Rafter Section alignment - in the front, Rafter will overhang Porch post by
approximately 1/2”. Rafter will also overhang the siding of Middle Gable Wall.
45. Slide Rafter Section up on gable framing until bottom of Ridge Board slips into gable notch.
Soffit will sit approximately 1/8” away from wall panel.
Soffit
In Porch area, a
larger gap will occur
between Soffit and
Top Plate.
Rafter will
overhang
Porch Post.
Gable Notch
Ridge Board
Rafter
Rafter will slightly
overhang siding
of Middle Gable
Wall.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 19
Soffit should sit approx.
1/8” away from wall
panel. End Rafter will sit
flush with end of wall.