Instructions / Assembly

Parts List:
A. Floor Section
3 - 45 1/2” x 75” - Floor Joist Frames
3 - 45 1/2” x 21” - Floor Joist Frames
2 - 45 1/2” x 75” - Plywood Floor - Large
2 - 45 1/2” x 21” - Plywood Floor - Small
6 - 1 1/2” x 3 1/2” x 72” - Floor Joists
17 - 1” x 5 1/2” x 45” - Deck Boards for Porch
10 - 1 1/2” x 3 1/2” x 68” - Floor Runners
1 - 1/2” x 1 1/4” x 31 3/4” angle cut edge (Threshold for Floor and Deck)
B. Wall Section
4 - 45 1/2” x 75” - Wall Panels - Bottom Wall Plates Unattached
4 - 1 1/2” x 2 1/2” x 45 1/2” - Bottom Plates
3 - 45 1/2” x 75” - Window Wall Panels
1 - 12” x 73” - Narrow Porch Wall Panel
3 - Functional Window Inserts
Door, Door Jambs & Header
1 - 1 1/2” x 3” x 73” - Door Jamb
1 - 2” x 3” x 45 1/2” - Door Header
1 - 31 1/2” x 42” - Bottom Door
1 - 31 1/2” x 30” - Top Door
2 - 2 1/2” x 1/2” x 72” - Interior Vertical Door Stops (approx.)
1 - 2 1/2” x 1/2” x 36” - Interior Top Horizontal Door Stop (approx.)
Gable Walls
2 - Rear Gable Walls - Triangular Shaped with Designer Shingles
2 - Middle Gable Walls- Triangular Shaped with Siding flush to frame
1 - Front Triangular Gusset Gable - Designer Shingles
Top Wall Plates
3 - 3/4” x 2 1/2” x 32” - Rear Top Plates -
(2 pieces Angle cut on end, 1 piece straight cut both ends)
2 - 3/4” x 2 1/2” x 72” & 19” Front Top Plate - Straight cut on ends.
4 - 3/4” x 2 1/2” Side Top Plate - Angle cut on length - 66 3/4”
C & D. Rafter and Roof Section
18 - 1 1/2” x 3 1/2” x 56 1/2” - Rafters (angle cut)
2 - 3/4” x 4 1/2” x 52 1/2” - Ridge Boards
2 - 3/4” x 4 1/2” x 84” - Ridge Boards
2 - 1/16” x 3” x 7” - Metal Ridge Board Connectors
4 - 1/2” x 4 1/2” x 68 1/4” - Soffits (Both Sides)
2 - 3/4” x 3 1/2” x 72” - Roof Gussets - (angle cut on ends)
Roof Panels
4 - Outside Rear Roof Panels (Shingles overhanging roof battens on 1
end)
2 - Middle Roof Panel (Shingles flush with roof battens)
Porch Section
2 - 3 1/2” x 3 1/2” x 74” Long Porch Posts
1 - 3 1/2” x 3 1/2” (short ) Deck Post
3 - Hand Rail Sections
2 - 3/4” x3 1/2” x45” - Top Plate Front Extension
2 - 1” x 4 1/2” x 74” - Front Wall Trim/Supports (both with 2 1/2”w
Filler Strip Attached to back).
4 - Corner Brackets
12 - Post Base Trims - 1/2” x 1 1/2” x 4”
2 - 1/8”x 45” x 48” - Porch Ceiling Veneer
E. Miscellaneous Section
Ridge Caps
22 - Cedar Roof Ridge Caps
Bottom Skirting
2 - 1/2” x4 1/2” x 48” - Front Bottom Skirting
8 - 1/2” x4 1/2” x 45 1/4” - Side and Rear Bottom Skirting
Corner & Sidewall Trim
6 - 1/2”x 2 1/2” x 79” - Narrow Trim
1 - 1/2” x 2 1/2” x 75” - Ream Seam Trim
2 - 1/2” x 2 1/2” x 75” - Rear Filler Trim
2 - 1/2” x 4 1/2” x 82” - Rear Wide Trim
2 - 1/2” x 2 1/2” x 44” - Horizontal Trim above Door
1 - 1/2” x 2 1/2” x 72” - Porch Trim
1 - 1/2” x 2 1/2” x 72” - Door Trim
Facia Trim
2 - 3/4” x 3 1/2” x 58” - Back Facia- Angle cut on ends
4 - 3/4” x 3 1/2” x 71 3/4” - Side Facia
2 - Front Gusset Facia (shingles)
Filler Shingles (5 1/2” wide)
12 pcs - Long
4 pcs - Short
2 pcs - Rear Gable Walls 1-16” long / 1 - 7 1/2” long
Misc. Pieces
3 - Flower Boxes
3 - Facia / Trim Detail Plates
1 - Pentagon Detail Plate
1 pc - Spare Wall Siding
2 pcs - Spare Shingles- use to shim door, etc
Thank you for purchasing our 8x12 Santa Rosa Garden Shed.
Please take the time to identify all the parts prior to assembly.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 2