Instructions / Assembly

47. When Rafter Section is aligned correctly, tack Rafter Section temporarily down from Middle
Gable Wall framing into Rafter with 2 - 2” screws.
Gable Notch
Ridge Board
48. Place 2nd completed Rafter Section on gable wall framing. Position as per Steps 45 & 47.
49. When both Rafter Sections are correctly aligned, Ridge Boards will sit in both the rear and
middle gable notches. Front Rafters will overhang Porch Posts.
Rear Gable
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 20
Note: Metal Ridge Board is
offset with 1st Rafter Section