Instructions / Assembly

Roof Plywood flush
with rafter end.
58. From the outside, screw down through bottom row of shingles into rafter with 1 - 2 1/2” screw.
Locate Middle Roof Panel (roof plywood flush with outside of shingles) and place on middle rafters.
56. Identify Roof Panels. There are 2 Outside and 1 Middle Roof Panel per side. Starting with
outside rear panel, lift up and place on rafters.
Shingles overhang plywood
on outside panels.
Shingles and plywood
flush on middle panel.
Outside Roof Panel with
Shingles overhanging end.
57. Place Outside Roof Panel so it sits flush on 3rd rafter from the outside (doubled up rafter).
Plywood on roof should be flush with end of rafter at bottom.
3rd Rafter from
the outside
Screw bottom row of shingles down
to rafter with 1 - 2 1/2” screw.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 23