Instructions / Assembly

66. Slide in another Filler Shingle and
attach as per Step 65. On your last
row of shingles, the filler shingle is
precut to fit properly. Attach to roof with
2 finishing nails per shingle.
69. Position Porch Veneer with best face exposed, flush with front Rafter and Ridge Board. When
correctly in place, nail veneer to rafters with 12 finishing nails. Complete both sides.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 26
4 - 90 degree Simpson
Ties on Rear Gable.
67. Position 4 Simpson Strong ties on plywood and
rear outside rafters and secure with 8 - 1 1/4” screws.
68. To further secure roof panels, from the inside, drill pilot holes in each Mid Rafter (3 per Rafter)
on an angle. Using 3 - 2 1/2” screws, secure rafters to roof plywood. Note: from outside, have a
helper push roof panel down so plywood sits flush against rafter when securing. In Porch area, angle
screw both the mid and outside rafters.
Mid Rafter
Roof Plywood
3 - 2 1/2” screws Toe
Nailed in each Mid Rafter
48” wide