Instructions / Assembly

72. Attach Filler Trims
(2 - 1/2” x 2 1/2” x 75”) to
rear walls. Hammer with
8 - 1 1/2” finishing nails.
Trims are positioned flush
with siding and bottom
skirting.
70. Attach Bottom Skirting
around the base of the shed.
Skirting will hide floor framing.
The front skirting pieces will
overlap the side skirting. Start
with side skirting for porch.
Attach with 4 - 1 1/2” finishing
nails per piece. The skirting will
sit flush with the outside deck
board. The middle and end side
skirting pieces will sit flush
under siding of wall panel.
3 pieces of 45 1/2” Skirting
per side and 2 for Rear.
Side Overhangs
Front Skirting
Flush
Rear Skirting
Side Skirting
Gap at rear
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 28
Filler Trim
Attach
additional 1 1/4” screws
on bottom edge of wall siding
into bottom wall plate to further
secure bottom siding to framing.
Drill pilot holes in siding to
prevent splitting.
71. There are 2 Front
Skirting Pieces that are 48”
long. Use 6 finishing nails
on both front skirting pieces
for extra support since it will
be a high traffic area.
Small gap