Instructions / Assembly

76. Position Back Facia (angle cut on ends) and Side Facia (square cut ends) in corner. Line Facia
up so square cut Facia is positioned between angled cut facia. Attach angled facia to plywood ends
with 8 - 1 1/2” finishing nails per piece. Gap where facia boards come together at peak will be covered
in Step 78. Do a dry run using Facia to help you correctly position before attaching.
77. Attach Side Facia to roof rafter ends. There are 2 facia pieces
per side. Secure with 8 - 1 1/2” finishing nails per piece. See Step 82
for final facia attachment
78. Attach Pentagon Detail Plate and 3 Facia /Trim Detail Plates to cover seams where Facia
pieces come together. Also use a Trim Detail Plate to cover the seam where the Horizontal Trim above
the door and window come together. Secure with 4 - 1 1/2” finishing nails per piece.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 30
Side Facia
Angle Cut Back Facia
Side
Facia to run 5/8” past
end of Roof Plywood. Use
Gable Facia to help you
align correctly