Instructions / Assembly

81. Attaching the Gable Gusset is next. Screw 4 90 degree
Simpson Strong Ties up into plywood of roof panel with 2 -1 1/4”
screws (see picture). Place Decorative Gusset Gable
underneath porch roof so peaks line up. Lift up Gusset Gable until
seams meet. Mount with 2 - 1 1/4” screws into each Strong Tie.
79. Place First Roof Ridge Cap (Lower Grade Undercourse Ridge Cap) on roof peak overhanging
shingles by approximately 2”. Attach with 2 - 1 1/4” Shingle Nails 9” from end. Place 2nd Ridge Cap
1” back from 1st cap. Attach with 2- 1 1/4” Shingle Nails 9” from end.
80. Place 3rd Ridge Cap 8” back from 2nd (enough to cover
shingle nails). Attach 3rd Ridge Cap down as per Step 79.
Continue to position and attach Ridge Caps until half roof is
complete. From opposite side, position and attach Ridge Caps as
described above. Score/cut 1 Ridge Cap to 12” or to fit in the
center of roof. Attach center cap with 4 - 1 1/4” Shingle Nails.
9” from end
8”
8”
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 31
Undercourse
Rid Cap