Instructions / Assembly

7.Attach Floor Runners to completed floor frame.
There are 2 floor runners per 136 1/2” side and 5
completed runners in total. Use 6 - 2 1/2” screws
per completed Runner.
96”
5. Complete all large and small frame attachments.
Screw each completed section together with 8 - 2 1/2”
screws.
6. When completed, your floor footprint
should be 136 1/2” Deep x 96” Wide.
136 1/2”
8. Make sure Runners are flush with
outside and front and rear floor framing but
not overhanging.
3. Lay out Floor Joist Frames as illustrated.
There are 3 larger and 3 smaller Frame Sections.
The Footprint for the floor when attached together
will be 136 1/2” Deep x 96” Wide.
4. Attach each large and small floor joist
frames together with 6 - 2 1/2” screws per
section.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 5
Material used for Floor
Runners are not graded
for appearance. Some
defect is allowed.