Instructions / Assembly

Exploded view of all parts necessary to complete the
Wall Section. Identify all parts prior to starting.
13. Lay out all the wall
panels and become familiar
with their location. On
Standard Kits, there are
3 Window Wall Panels,
4 Solid Wall Panels,
1 Narrow Wall Panel and a
Dutch Door (top and bottom
section). Make sure to
position panels right side up
so water is directed away
from and not into shed.
Look at window wall
panels to determine proper
wall orientation.
Window Wall
Panel (3)
Solid Wall
Panel (4)
Door Header
Middle Gable Walls (2)
Side Top
Plates (4)
Angle cut on edge
Rear Top
Plates (3)
Rear Gable
Walls (2)
Front Wall Trim/Supports
with 2 1/2” Filler Strip (2)
Left & Right Side Config.
Handrail Section (2)
Long Porch
Posts (2)
Top Plate Front
Extension (2)
Corner
Bracket (4)
Top & Bottom
Door
Dutch Door
Narrow Wall
Panel (12” wide)
Window
Insert (3)
Bottom
Wall
Plate
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 7
B. Wall Section