Full Product Manual

28. Position remaining Rear and Side Top Plates on wall top framing to complete. Use 4 - 2” screws
per piece.
Rear Top Plates
Side Top Plates
29. Locate and place an Angled Wall Extendor on Rear Wall Top Plate. Position so Top Plate and
Extendor Wall angles line up and are flush with each other. When in place, secure with 4 - 2 1/2”
screws per piece.
Straight Edge to
line up angles
30.. Locate and place the Middle Wall Extendor on Top Plate and flush with Angled Extendor Wall
framing. When correctly in place, secure with 4 - 2 1/2” screws. Complete remaining Angled Wall
Extendor attachment. Use 4 - 2 1/2” screws to connect Middle Wall to Angled Extendor Walls. See
Step 31.
Lap Siding of panels
will fit together.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 14