Instructions / Assembly

Do Not Attach Walls To
Floor until Step 29.
16. Position rear solid wall into
place on plywood floor. Butt both
vertical wall studs of side and rear
walls together and attach with
3 - 2 1/2” screws. Screw at the
bottom, middle and top of stud to
secure properly.
Rear Solid Wall
Side Solid Wall
17. With the corner wall attachment complete, position the
rear Window Wall panel in place so bottom 2x3 wall
framing is sitting flush with outside floor joists and
plywood floor. Wall siding should overhang floor by
approximately 1/2”
When positioned correctly, attach both rear wall panel studs
together as per Step 16.
Rear Solid Wall
2x3 wall framing flush
with outside of plywood.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 9
Optional - Caulking seams
will help prevent moisture
from entering at seam.
Caulking is included to
complete Lexan Windows
only. Additional Caulking
may be required.
18. Locate Window Inserts for both Regular and Narrow Double Walls. The Smaller Window Insert fits
the Double Window Wall cavity. Before installing, run a bead of caulking around window opening perimeter.
Position window in cavity and secure with 8- 1 1/4” screws. Locate and postion Window Trim around window
doing a dry run first and attach with 4- 1 1/4” finishing nails per piece.
Trim Sizes = Reg. Window- 24 1/16” =top 23” = sides & Bottom. Narrow Window - 20 1/4” = top 21 7/16” = sides 19 1/4” = Bottom