User's Manual

Getting Started

This chapter describes how to set up and start the Retail Tablet.

Setting Up the Retail Tablet

To set up the Retail Tablet:

Remove the transparent cover sheet protecting the tablet’s screen.

Use the eece side of the provided cleaning cloth to clean o any dust on the

touch screen.

Mount or position the tablet on the table, counter, shelf or oor according to

the provided accessories. You may refer to the Retail Tablet Accessories section

(page 20) for a description of mounting accessories and other devices that can be

connected to the Retail Tablet

Turning On the Retail Tablet

The Retail Tablet is precongured to automatically start its Autoplay application

when it is turned on. You may refer to the Logging Out of the Retail Tablet

Autoplay Application section on page 11 for instructions on logging out of the

i DISPLAY Autoplay application in order to access a standard Android OS screen

To turn on the Retail Tablet:

Connect one side of the power supply to the tablet’s DC In socket located on its

back lower side.

Plug the power supply into a standard electrical outlet. If this is the rst time the

tablet is turned on, then wait two minutes after plugging in the power supply

before pressing the On/O button to turn on the tablet.

Slide the On/O button on the back of the tablet.

NOTE

Each time the tablet is powered on (after being o), it may take up to two

minutes to begin to play.

The tablet is provided with a preloaded demonstration application that it

automatically starts to play.