User's Manual

16
Barcode Reader – Plays Per Barcode
The Retail Tablet can be used to automatically play the content of a specic le in
the Root directory of the tablet when a barcode reader is connected.
Copy a le onto the Retail Tablet with the same exact name as the barcode. The
tablet will then automatically play the content of that le when a product with
that barcode is read.
How Do I Load Content?
Retail Tablet auto copy feature makes loading content simple!
You can load content les using either a USB drive, a Micro SD, Wi-Fi or a mobile
network (using a SIM card), as follows.
USB – Loading Content
Loading Content into Folder 0
To load from a USB drive into Folder 0:
Create a folder named 0 on a USB disk. Remove all other content from the USB
drive.
If a video or image is playing, then insert the USB drive into one of the two USB
ports on the back of the tablet.
If an application is playing, then insert the USB drive into one of the two USB ports
on the back of the tablet and then after ten seconds, quickly press the Home
button on the back of the tablet.
After a few seconds a window pops up requesting a password.
Enter the password and tap the OK button. If this is the rst time you are using the
Retail Tablet, then the password is: 11223344. The following window is displayed:
Tap the Replace button to delete the content of Folder 0 on the tablet and replace
it with the content of Folder 0 on the USB drive.
– OR –
Tap the Append button to add the content of Folder 0 on the USB drive to the
content of Folder 0 on the tablet.
A success message is displayed after the content has been copied. The le(s) in
Folder 0 will automatically start playing. If multiple les are in Folder 0, then they
play one after another repeatedly.
If the tablet does not start to play the content, then restart it and the content
should start playing automatically after restart.
1.
2.
3.
4.
Append Replace
Hint
Folder 0 exists.
5.
Playing Content