RR 2160 MkII Stereo RetroReceiver RR2160 Mk II ENTER MENU TONE OFF BASS BALANCE TREBLE RECORD VOLUME STANDBY PHONES LEVEL AUX SPEAKER ® SPEAKER EQ EXTERNAL LOOP USB Owner’s Manual SOURCE MUTE
RR2160 MkII Owner’s Manual Please Read First ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR Caution: To reduce the risk of electric shock, do not remove the cover. No user serviceable parts inside. Refer to qualified personnel. Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
RR2160 MkII Owner’s Manual Veuillez d'abord lire • • ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR Mise en Garde: Pour réduire le risque de choc électrique, ne retirez pas le couvercle. Aucune pièce réparable par l'utilisateur à l'intérieur. Consulter un personnel qualifié Avertissement: Pour réduire les risques d'incendie ou de choc électrique, n'exposez pas cet appareil à la pluie ou à l'humidité.
RR2160 MkII Owner’s Manual NOTE: It is always a good idea to avoid using any audio or video equipment on the same AC circuit as equipment with motors, such as air conditioners or refrigerators. This will lessen the possibility of power variation and electrical start-up noise affecting your sound system. Power Cord The removable power cord that is shipped with the RR2160 MkII is specifically designed to be used with this product.
RR2160 MkII Owner’s Manual Table of Contents 2 5 5 6 6 6 7 9 10 11 12 13 16 17 18 18 18 18 22 22 22 22 23 23 23 24 24 24 25 25 26 27 27 28 28 28 29 30 31 32 Please Read First A Brief Note on This Manual For Future Reference Quick Guide to Features Unpacking Accessories RR2160 MkII Front Panel RR2160 MkII Rear Panel Remote Control Connecting Your RR2160 MkII Connecting and Using Antennas Connecting Source Components Loudspeaker Connections Subwoofer and Bass Management External Amplifier Connections 12 Vol
RR2160 MkII Owner’s Manual Quick Guide to the Features Unpacking We’ll explain the RR2160 MkII’s many features later in this manual, but first we wanted to identify some of the key features so you can watch for those you’re most interested in. Your RR2160 MkII has traveled to you in packaging designed to protect it from the hardships of shipping that it inevitably must endure.
RR2160 MkII Owner’s Manual RR2160 MkII Front Panel F2 F1 F3 F5 F4 F8 F6 & F7 F9 RR2160 Mk II ENTER MENU TONE OFF BASS BALANCE RECORD TREBLE VOLUME STANDBY F10 PHONES LEVEL AUX F11 F12 F13 SPEAKER SPEAKER EQ EXTERNAL LOOP F14 F15 F16 F1 Tone Off (Defeat) Control (Page 23) Press to take the tone controls out of the signal path so that they have no effect regardless of where they’re set. The button’s blue LED will light when tone controls are inactive.
RR2160 MkII Owner’s Manual F16 External Loop (Page 12) Press to add a product connected to the rear panel External Processor Loop connections (R21) to the signal path. (Remember to turn that external unit on!) The button’s blue LED will light when you’ve chosen this optional signal path. Note: When the signal is routed through the External Processor Loop and there is no unit connected to the jacks, no signal will appear at either the loudspeaker or headphone outputs.
RR2160 MkII Owner’s Manual R2 R1 WiFi ANT. R4 R3 R5 ETHERNET USB PLAY/ UPGRADER R11 R7 R6 RR2160 MkII Outlaw Audio, LLC Easton, MA USA www.outlawaudio.com Designed in the USA Made in China PC-USB COAX 1 COAX 2 OPT 1 OPT 2 ACCESSORY POWER 5V DC / 1.0A MAX MASTER POWER TRIGGER OUT 1 2 PHONO GROUND PHONO + 1 AUDIO IN 2 3 4 REC OUT EXTERNAL PROCESSOR OUT IN L - PRE OUT L BASS MANAGEMENT 60 MC MM B ON IR-IN IR-OUT - A RIGHT SPEAKERS R10 HD RADIO ANT.
RR2160 MkII Owner’s Manual Remote Control C1 ON OFF SLEEP ANA COAX OPT USB PHONO AUX NET LOOP TNR 1 2 3 4 5 6 7 8 9 REC 0 SPK A/B C2 C3 C4 C5 Menu C15 Exit C16 C6 C7 C17 ENTER Treble Bass C18 C19 C8 C9 C14 Vol + Mute T.Scan+ Vol _ SPK EQ T.Scan- T.Mode Disp P.Scan+ Direct Mem P.Scan- C20 C10 C11 C12 C13 C21 C22 Outlaw Audio C1 Power On (Page 22) Press this button to turn on the RR2160 MkII.
RR2160 MkII Owner’s Manual C15 Speaker Selector (Page 23) When two pairs of speakers are connected to the RR2160 MkII, this button selects which pair is active. C16 Exit (Page 28) Press this button to exit the RR2160 MkII’s setup menu. C17 Enter (Pages 26 - 28) When navigating the setup menu (C6), pressing this button will access sub-menus or select highlighted options. Or, press to choose a new track after using the Up/Down cursor arrows (C7) to search for another track.
RR2160 MkII Owner’s Manual WiFi Antenna Use this antenna to pull a WiFi signal in situations where a wired Ethernet connection cannot be connected to the rear of the RR2160 MkII. Experiment with the antenna’s position to obtain the strongest signal. Connecting Source Components Connect your input sources as shown below. Once the source is connected you may select it by pressing the front panel Source selector (F18) to step through your various input choices.
RR2160 MkII Owner’s Manual External Loop Connections Loudspeaker Connections Using shielded RCA-to-RCA cables, connect the external processor’s analog audio outputs to the RR2160 MkII’s L & R analog audio inputs. Next, connect the external processor’s analog audio inputs to the RR2160 MkII’s analog audio outputs. The connections between the RR2160 MkII and your loudspeakers are critical to good sound.
RR2160 MkII Owner’s Manual Connecting Audio Equipment to the RR2160 MkII NETWORK AUDIO PLAYER/ OPTICAL OUTPUT COMPUTER/USB OUTPUT TURNTABLE WiFi ANT. CD TRANSPORT/ DIGITAL COAX OUTPUT USB PLAY/ UPGRADER ETHERNET HD RADIO ANT. RR2160 MkII Outlaw Audio, LLC Easton, MA USA www.outlawaudio.com Designed in the USA Made in China SERIAL NUMBER: COAX 1 PC-USB + PHONO B OPT 2 ACCESSORY POWER 5V DC / 1.
RR2160 MkII Owner’s Manual Connecting Recording Equipment and An External Processor to the RR2160 MkII WiFi ANT. USB PLAY/ UPGRADER ETHERNET HD RADIO ANT. RR2160 MkII Outlaw Audio, LLC Easton, MA USA www.outlawaudio.com Designed in the USA Made in China SERIAL NUMBER: PC-USB + TRIGGER OUT 1 2 PHONO AUDIO IN 2 3 1 4 REC OUT EXTERNAL PROCESSOR OUT IN L - PRE OUT L BASS MANAGEMENT 60 MC MM B ON IR-IN IR-OUT PHONO GROUND + COAX 2 MASTER POWER ACCESSORY POWER 5V DC / 1.
RR2160 MkII Owner’s Manual Bare Wire or Pin Terminations A Note On Polarity/Phase Unscrew the outer barrel of the speaker connector until you see the hole in its center post. Insert the conductor or pin into the hole and screw the outer barrel tightly. When speakers are connected correctly, they are said to be “in phase.” This is critical to proper sound reproduction as it means that the drivers in each speaker work together, with the cones in each speaker moving in the same direction at the same time.
