Owner's Manual
RR2160 MkII Owner’s Manual
Outlaw Audio RR2160
MkII Stereo RetroReceiver 10
Remote Control
C1 Power On (Page 22)
Press this button to turn on the RR2160 MkII.
C2 Power Off (Page 22)
Press this button to place the receiver in standby mode.
C3 Source/Input Selectors (Page 22)
Press the button corresponding to the name of the input
you wish to listen to. For the analog audio inputs (ANA),
coaxial digital audio inputs (COAX), optical digital inputs
(OPT), USB inputs (USB), and Internet Radio inputs (NET),
press the button multiple times to cycle through the input
choices.
C4 Numeric Keypad (0-9) (Page 25)
Press these buttons
to enter numbers for different
functions such as direct input of station frequencies and
direct access to preset stations for the tuner.
C5 Record (Pages 12, 24)
Press this button to cycle through the available analog
inputs that can be used as the recording source.
C6 Menu (Pages 27, 28)
Hold down this button to access the RR2160
MkII’s setup
menu, or press it briefly to navigate back when utilizing
Internet Radio or the setup menu.
C7 Cursor Control (Pages 25, 26, 28)
The Left and Right buttons provide ba
lance control. The
Up and Down buttons provide the same function as the
Tuning Up/Down buttons (F6/F7 on the front panel)
when using the tuner or navigating USB or Internet
Radio.
C8 Treble control (Page 23)
This button and the Left/Right cursor buttons control the
treble setting, which is displayed on the front panel
display.
C9 Volume Up/Down (Page 22)
Press these buttons to raise or lower the volume.
C10 Speaker EQ (Page 23)
Press this button to cycle through the available S
peaker
EQ settings.
C11 Tuner Mode (Page 25)
This button selects either the “FM Stereo” or “FM Mono”
tuner mode.
C12 Display (Page 28)
This button adjusts the brightness of the front panel
display.
C13 Direct (Page 25)
This button starts the process of selecting a broadcast
station directly. Within five seconds of pressing the
button, key in a broadcast frequency using the numeric
pad (C4).
C14 Sleep (Page 25)
Press this button to activate the sleep function, which
turns the RR216
0
MkII off after a user-selectable amount
of time.
ON
OPTANA
1 2 3
4 5 6
8
0
REC
Vol
+
P
P
T
T.Scan-
SPK
EQ
Disp
Mem
SLEEP
T.Mode
Direct
ENTER
SPK
A/B
9
USB AUX
OFF
PHONO
Mute
Menu
Treble Bass
Exit
_
C1
C2
C3
C4
C5
C6
C7
C8
C9
C11
C13
C14
C10
C12
C15
C16
C17
C18
C19
C20
C21
C22
COAX
NET LOOP TNR
7
Vol
.Scan+
.Scan+
.Scan-